Extractor (IndustrialCraft 2)
|ID Name|| |
|Affected by Gravity||No|
As with other IndustrialCraft2 machines, there are two ways to provide the Extractor with EU: either a direct Cable connection/contact with a generator or energy storage items will suffice. To remove the Extractor, right-click with a bronze Wrench. Note that there is a 20% chance of destroying the machine when removing it with this method; if destroyed, it will drop a Machine Block instead of itself. With a pickaxe or any other tool, it will have a 100% chance of dropping only a Machine Block. For a 100% chance of successfully retrieving the Extractor, use an Electric Wrench set to Lossless Mode (hold down "M" and right-click with the Electric Wrench in hand).
The Extractor is able to take 1 sticky resin and produce 3 rubber from it, providing the machine is currently being powered (see Energy below). The Extractor can also extract one rubber from either Rubber Wood or a Rubber Tree Sapling. It extracts two rubber from a Slimeball.
It is also the most efficient way to extract certain dyes, such as Dandelion Yellow.
An Extractor can also be used to empty certain Cells such as the Hydrogen Cell, Deuterium Cell and much more usefully the Compressed Air Cell discarding it's contents and returning an empty cell for reuse. It does much the same for (Filled) Tin Cans and can remove dyes from Wool.
The Extractor can receive up to 32 EU/t and package, unless it is upgraded with a Transformer Upgrade. If you supply it with any more energy than low voltage (32 EU/p), the Extractor will explode! The extractor consumes 313 EU per operation and requires a minimum of 2 EU/t to operate continuously.
Note: Damaged treetaps do NOT work in this recipe!
UsageExtractor (IndustrialCraft 2) can be used to create the following items:
Top face: Input slot
Bottom face: Battery slot
Front face: Output slot
Back face: Output slot
Left face: Output slot
Right face: Output slot